Methods for installing plastic panels on the ceiling of the bathroom
First of all, the supporting panels should be fixed, to which our panels will subsequently be attached. Retreat 50 mm from the ceiling down and apply marks. The bearing frame will be the best wooden beam. Then, to the lower part of the frame, we fasten the profile, for example, with a stapler. To determine what width the panel needs, it is necessary to measure the distance between the profiles. You can cut them with a conventional knife -haired wood. Next, take the panel cut previously and insert it into the profile at one end, bend it in the middle and insert the second end of the panel into the profile, our panel becomes in place. You should also take care of the light in advance, and conduct wiring before you start finishing the ceiling. Then you do the same with the rest of the panels, until you finish the entire ceiling.
The advantages of such a ceiling are obvious: in addition to the two above, it is easy to wash, looks good, moisture is not terrible, and, in case of damage, damaged panels are easily replaced by new. Today there are plastic panels of various colors, as well as with imitation of different surfaces. Therefore, by choosing plastic panels for finishing the ceiling of the bathroom, you can make your bathroom unique room.